FlexiRECORD

● Audio adaptor: 2.5mm to 3.5mm (For use with the Multi-Function Adapter. Not needed if device already has multiple ports for charging, connecting to PC and to a Headset.)

Please see ADDENDUM for more information on adapters, if needed.

Figure 1-1 Audio jack and multi-function adaptors.

● 1 to 3 meters of 3.5mm audio cable (with Male jacks both ends) connected to the Line-In or Microphone jack of the PC.

Figure 1-2 Audio cable with male jacks both ends.

PHYSICAL CONNECTION USAGE

With USB connected, connect the audio output of the Monitor phone to a line or microphone input of the PC sound card. If the mobile doesn’t have a separate audio output, use a multi-function adapter to split the audio.

Figure 1-3 Physicall connection without USB multi-function adaptor.

OVERVIEW

“ FlexiRECORD ” is a companion product for FlexiSPY PRO-X. Using a Windows Mobile phone (the Monitor) connected to your PC, “ FlexiRECORD ” allows you to automatically record SpyCalls and Intercept Calls and store them on your PC for playback. It also includes the remote control software (FCTL) that is used to control FlexiSPY PRO or Pro-X Target devices.

With “ FlexiRECORD ” there is no need to manually make Intercept Calls, and you can leave it running 24x7 for automatic recording of all calls that match the Watch List as configured on your Target device.

AFTER YOUR PURCHASE

You will receive an email with your Activation code. You need this during the installation process.

DOWNLOADING THE SOFTWARE

Open the PC web browser and go to http://djp.cc. Enter the Activation key (FlexiKEY) and select Download. The file name is “ FlexiRectSetup.msi ”

QUICK-START INSTALLATION
(Full details on next page)

Before you begin, please ensure that you have read and comply with all points in the System Requirements section above. Failure to do so will result in an incomplete installation or an installation failure.

● Connect the windows Mobile phone to the PC and start Active Sync or Windows Mobile Device Centre.

● Double-click “ FlexiRectSetup.msi ” to start the installation.

● A Windows XP or Windows Vista security dialog may ask if you want to run a program. Answer yes.

● The installation will continue on the mobile device.

SOFTWARE INSTALLATION

· IMPORTANT: ActiveSync for Windows XP or Device Center for Windows Vista MUST ALREADY be installed and running with your Windows Mobile Device connected, before beginning the “ FlexiRECORD ” installation.

· Start the installation process by double clicking “ FlexiRectSetup.msi ” and follow the procedure.

Figure 1-4 Start installation.

● Select desired path or folder to install “ FlexiRECORD ” software and click Next

Figure 1-5 Select Installation Folder.

● Waiting for “ FlexiRECORD “ installation.

Figure 1-6 Installing FlexiRECORD software.

● Immediately after completion of “ FlexiRECORD ” on PC, the mobile client will begin installing. Follow the instructions.

Figure 1-7 Select software and any packages to install on mobile device.

● “ FlexiRECORD ” Installation Complete.

Figure 1-8 .Completed install of ‘FlexiRECORD’ software.

ACTIVATE THE PRODUCT

From the Start menu on the PC, run “ FlexiRECORD ”. It will ask for an Activation key. Enter your FlexiKEY and click Activate.

NOTE: You may be asked for permission to let “ FlexiRECORD ” connect to the Internet. Answer yes.

WINDOWS MOBILE DEVICE SETUP WIZARD

The product will not work correctly until the mobile device (Monitor phone) has been setup. Upon first run, the Windows Mobile Device Setup Wizard will automatically run. Click Next to begin the setup. (You can run this Wizard again at any time by selecting Tools->Mobile Device Setup Wizard.)

If the mobile device is missing the .NET Compact Framework 2.0, red lettering in the bottom of the main program window will alert you that “Compact Framework 2.0 not installed on PocketPC (device model)”

The Wizard will also detect this by stating “.NET Compact Framework is not installed on the device. Please click the Install/Reinstall button to proceed with installation.” If you see this message while running the Wizard, click the Install/Reinstall button on this page to install the necessary component to the Windows Mobile device.

If the Wizard indicates the .NET Compact Framework is already installed, please skip to the next page of this manual, otherwise continue as follows.

On the Mobile Device, select “Device” as the install destination and then click “Install.” Allow the device to install the .NET Compact Framework before continuing with the Wizard. After this installation completes you may be prompted to restart the device. Once restarted, please make sure that ActiveSync or Device Center is fully reconnected before continuing with the Wizard.

Click Next tab of Wizard. If the “ FlexiRECORD ” client is already installed, the next Wizard panel will state “ FlexiRECORD client is already installed on the device. You can proceed to the next step. ”

Click Install/Reinstall if the Wizard indicates the “ FlexiRECORD ” client is NOT installed on the device yet.

Click Next when “ FlexiRECORD ” client is installed.

Installation should be completed. Click Next to close the Wizard. At this point you should see the “ FlexiRECORD ” client running on the mobile device.

NOTE : Whenever the Monitor is connected and “ FlexiRECORD ” is launched on the PC, the software will automatically run on the Monitor and sync to the PC program, ready to record calls according to the program settings.

QUICK SETUP & TEST

These instructions assume you have already installed “ FlexiRECORD” to PC and Mobile, with Mobile connected.

● Setup User Account

Setup a user account by selecting Tools->Settings and User Account tab. You are required to enter one username and password for each account.

● Setup Target

Access the Target dialog from Tools->Edit Targets. A Target represents a FlexiSPY product that is installed and Activated on a mobile device. You are required to enter a Phone Number and a Key/Code. Select the Web Account associated with your Target Key/Code. If the Target device is already Activated, you can retrieve the Target’s ID/IMEI by clicking on the ‘<<’ button.

● Setup Audio Input

Go to Tools -> Settings and Audio Input to select the Audio Input the Windows Mobile Device is currently connected to.

● Make a SpyCall

Make a SpyCall by right-clicking on a Target in the list and choosing Make SpyCall.

● Send an SMS command

Right-click on a Target from the list and select ‘Send Command’. These are the standard SMS commands from the FCTL or FlexiSPY manual.

SETTINGS CONFIGURATION

The Settings dialog contains the following sections: Monitoring, Audio Input and User Account tabs.

The Monitoring Tab

● Monitor phone number: Is used to define your Monitor number (SMS command number 10). Refer to FCTL or FlexiSPY manual for more details. The Monitor number must be set in the international format (Example: +17135551212).

● Storage Location: Specifies where the recording, database and log files are saved. Changing storage location will not remove any files from the previous location. You can go back to previous locations to view previous information.

Figure 1-9 Monitoring Tab Settings.

The Audio Input Tab

This tab allows you to select the Audio Input Device (The one connected to the Windows Mobile). If no audio input is listed it may be that there is no sound card or audio drivers installed.

For best sound performance you may need to configure your audio input via Windows configuration.

NOTE : Before changing any configuration please record a test call and listen to the results. If the sound level is too low, too high or there is too much noise, you might improve the sound quality in the device configuration settings.

Here is how to do this on Windows Vista:

● Go into Control Panel and (in default view) open the heading for “Hardware and Sound”. Then click heading for “Sound”

● Under the recording Tab select the Audio Input the Monitor is connected to on the PC

● If available select the Properties options. Note that Properties depend on the audio software driver.

● At this point you may be able to adjust the audio levels up or down if necessary, or experiment with other settings as desired. It is recommended to adjust these settings minimally, and only if sound quality is not as expected.

Figure 1-10 Audio Input Tab Settings.

User Account Tab

An account refers to www.FlexiSPY.com accounts. You can setup multiple accounts. The only information you need to enter is the login user ID and password. When you add a user account you can link it later to a Target device. Please read the Editing Targets section for more information.

Figure 1-11 User Account Tab Settings.

Editing targets

To edit, add or remove a Target go to menu Tools->Edit Targets. A Target is a mobile phone that has FlexiSPY Activated on it.

● Alias name: You are required to define a unique alias name.

● Phone number: Should be in international format ( Example +17135551212 ).

● Key code: Target’s Activation code / FlexiKEY.

● IMEI/DeviceID: You can manually enter the IMEI or let the FlexiSPY server do the work by selecting the account this Target belongs to.

● << Button: If an account is selected the IMEI will be automatically downloaded from the FlexiSPY server.

● Select Account: Select the predefined account. ( To change account information go to Tools->Settings ).

Figure 1-12 Add New Target Dialog.

FlexiRECORD VIEW

There are three main views available from “ FlexiRECORD ” ’s main Window: Target Information, Recording Information and Recording Status View.

TARGET INFORMATION VIEW

This view can be access by selecting a Target. From this view it is possible to manage the records associate with the Target. You can delete or convert the recordings to MP3.

Figure 1-13 Target Information View.

RECORDING INFORMATION VIEW

This view can be accessed by selecting a specific recording associated with a Target, using the tree view. From this view you can Playback and view the recorded details.

Figure 1-14 Recording Information View.

RECORDING STATUS VIEW

This view appears automatically when a recording is in progress and will disappear when the recording ends. It displays a multitude of information about the current recording such as the duration, Target name etc.

Figure 1-15 Recording Status View.

USING FlexiRECORD

KEY FEATURES

INTERCEPT CALL : Intercept Calls are made automatically. Intercept Calls are made when an incoming SMS from the FlexiSPY Watch List is received by a connected Monitor phone.

SIM CHANGE NOTIFICATION : When the Target SIM changes, an SMS is sent to the Monitor station. The Target’s old phone number is automatically replaced by the new one.

VOICE PLAYBACK & CONVERSION : To access a recording, select the Target and the file you’re interested in from the tree view. This will bring you to the Playback view.

It is possible to convert a recorded file to MP3 format. To do this select the Target, go in the list view on the right pane and check the recording you wish to compress, then right click and select “Convert to mp3”.

MAKE SPY CALL

To make a SpyCall right-click on the desired Target and select ‘Make a SpyCall’.

NOTE : Once the call is connected recording begins automatically. To hang up press the red phone button.

Once the call ends you can replay the recording at the top of the Target’s recording list.

Figure 1-16 Make a SpyCall to selected Target.

SEND SMS COMMAND

To send SMS commands simply right-click the Target and select Send Command. There are many commands available. Please read the FlexiSPY or FCTL user manual for more information about all commands.

Figure 1-17 Sending SMS Command to the selected Target.

ACCESS WEB

You must have initially defined at least one Users account (Page 7 step 1) and associated it with a Target.

To access a Web Account simply select a Target, then right-click on it and choose “ Open URL ”.

Figure 1-18 Accessing FlexiSpy Web Account.

USING FCTL

FlexiSPY Control ( FCTL ) lets you control the FlexiSPY Target without having to worry about complex SMS commands. Simply right-click on a Target, select Send Command and then choose the function. FCTL will send the command for you.

IMPORTANT NOTE : SOME COMMANDS ARE NOT AVAILABLE ON ALL VERSIONS OF FLEXISPY

FCTL COMMAND LIST

● Enable SpyCall: A SpyCall is a call you make from the MONITOR phone to the TARGET phone, to listen to its surroundings or to patch into a live call.

● Disable SpyCall: This command instructs the TARGET phone to Disable SpyCall.

● Start Capture: This command instructs the TARGET phone to Start Capture of the currently selected events.

● Stop Capture: This command instructs the TARGET phone to Stop Capture of all events.

● Restart TARGET Phone: This command instructs the TARGET phone to Restart the Phone.

● Send Diagnostic: This command sends the Diagnostic Report back to the phone with FCTL. After this command is sent,

The TARGET phone will secretly send SMS back to the sender with detailed information about FlexiSPY; Current Settings, Database Information, current Monitor Number, etc.

● Send Events Immediately: This command instructs the TARGET phone to immediately send all captured events to the server.

● Event Capture Settings: This command is used to change the Events being captured on the TARGET phone.

● Change Log Settings: For Symbian 9 Targets only; if the user of the phone manually changes the Phone Log setting, then FlexiSPY cannot capture phone events.

If you are receiving SMS but no phone call Events, use this command to secretly change the Log setting.

● Change Watch List Options: This command changes the settings for Watch List such as Enable, Enable only for numbers in List, or Enable for All Numbers. See Options below.

● Add Watch List Number: This command is used to Add a New Number to Watch List.

● Clear Watch List: This command is used to clear all the numbers in the Watch List.

● Change GPS Settings: This command is used to Enable/Disable the GPS (Global Positioning System) or to change the frequency timer of the GPS coordinate (longitude and latitude) readings.

● Force APN Discovery: For Symbian Targets only; this command instructs the application to create new Access Points and test them, in case the Access Points on the Phone have changed or aren’t working.

● Query SMS Keyword: This command is used to query the keywords for automatically deleting the incoming SMS.

● Update SMS Keyword: This command is used to add/edit/clear the keyword for automatically deleting the incoming SMS. When there are any incoming SMS that contain this keyword (keyword1 or keyword2).

ADDENDUM

AUDIO ADAPTERS INFORMATION

Figure 1-19 2.5mm Headset Multi Adapter.

Description : OEM Samsung 2.5mm Stereo Headset and Audio Multi Adapter lets you connect your phone to any standard 2.5mm headset. With this adapter, you listen to music and conduct hands-free conversation using any standard 2.5mm headset or earbud. Adapter has additional jacks so that you can plug in your original headset and charger or data cable at the same time. One end of this adapter plugs into your phone's charger/headset/data cable port; the other end has 3 ports - 1 for your original headset, 1 for a 2.5mm headset and 1 for your charger or data cable.

Compatible with : Samsung A717, A727, A437, BlackJack i607, D807, UpStage M620, M610, T509, SYNC A707, Trace T519, T629, T809, Alias / U740 / SCH-U740, Helio Drift / SPH-A503, Helio Heat / SPH-A303.

Figure 1-20 3.5mm Stereo Audio Adapter w/ Microphone.

Description : OEM Samsung 3.5mm stereo audio adapter allows you to connect your phone to external speakers or stereo headphones. With this adapter, you can play music from your phone or conduct hands-free phone call conversations via external speakers. Adapter allows you to connect your phone to any speakers, sound system, stereo headphones or computer with a standard audio 3.5mm input jack. Now you can bring your music and share them with family and friends.

One end of this adapter plugs into your phone; the other end is a female 3.5mm jack. Integrated microphone with call/end button (if supported by phone) allows you to make and receive calls even when your phone is connected to external speakers or headphones.

Compatible with : Samsung A717, A727, BlackJack i607, D807, UpStage M620, M610, T509, Trace T519, T629, T809, SYNC A707, Alias / U740 / SCH-U740.

Figure 1-21 HTC Multifunction Audio Cable.

Description : This fantastic multifunctional cable ExtUSB (6 pin) connector allows users to connect a range of audio cables to their device. You only need to carry one adaptor. The cable allows for simultaneous charging and talking via a wired headset. Features are

- HTC ExtUSB standard headset connector

- Mini USB power connector

- 3.5mm audio connector (with in-line mic support)

- 2.5mm audio connector (with in-line mic support)

- Power status light

Compatible with :

- HTC: Advantage, Dream, MTeoR, P3300, P3350, P3400, P3470, P3600, P4350, P6300, P6500, S620, S710, S730, S740, Touch, Touch 3G, Touch Cruise, Touch Diamond, Touch Dual, Touch HD, Touch Pro, Touch Viva, TyTN, TyTN II

- i-mate: JASJAM

- O2: XDA Argon, XDA Atmos, XDA Diamond, XDA Ignito, XDA Orbit, XDA Orbit 2, XDA Stellar, XDA Trion

- Orange: M3100, SPV E650

- Palm: Treo 500v

- T Mobile: MDA Compact IV, MDA Vario IV

- T-Mobile: Ameo, G1, MDA Compact III, MDA Mail, MDA Touch, MDA Vario II, MDA Vario III, Touch Plus

- Vodafone: v1415, v1615, v1640

Figure 1-22 3.5mm Stereo Audio Adapter.

Description : Samsung 3.5mm stereo audio adapter allows you to connect your phone to any stereo headphones. With this adapter, you can play music from your phone or conduct hands-free phone call conversations via external speakers. Adapter allows you to connect your phone to any speakers, sound system, stereo headphones or computer with a standard audio 3.5mm input jack. Now you can bring your music and share them with family and friends. One end of this adapter plugs into your phone; the other end is a female 3.5mm jack.

Compatible with :

- Samsung Helio Fin SPH-A513

- Samsung A517

- Samsung Helio Mysto SPH-A523

- Samsung A637

- Samsung A737

- Samsung SLM A747

- Samsung Propel A767

- Samsung Access A827

- Samsung Rugby A837G

- Samsung Ace SPH-i325G

- Samsung BlackJack II SGH-i617

- Samsung Omnia SGH-i900

- Samsung Epix SGH-i907

- Samsung M305

- Samsung M510

- Samsung M520

- Samsung R200

- Samsung Hue R500

- Samsung R610

- Samsung T339

- Samsung T439

- Samsung T409

- Samsung Beat T539

- Samsung T639

- Samsung Blast T729

- Samsung Katalyst T739

- Samsung T819

Figure 1-23 2.5mm Female to 3.5mm Male Headset Adapter Cable.

Description : 2.5mm adapter cable allows you to connect your 2.5mm headset to MP3 players or other portable music or audio players. With this adapter, you can listen to music from any audio source with a 3.5mm headphone jack via your cell phone's 2.5mm headset. One end of adapter is a male 3.5mm plug; other end is a female 2.5mm socket. Suitable for 2.5mm headsets and devices with a 3.5mm headphone/line out jack.

Figure 1-24 3.5mm Stereo Audio Adapter.

Description : LG 3.5mm stereo audio adapter lets you to connect your phone to stereo headphones or external speakers. With this adapter, you can play music from your phone or conduct hands-free phone call conversations via external speakers, sound system, stereo headphones or computer with a standard audio 3.5mm input jack. Now you can bring your music and share them with family and friends. One end of this adapter plugs into your phone; the other end is a female 3.5mm jack.

Compatible with:

- LG AX8600

- LG Invision CB630

- LG CE110

- LG CG180

- LG CU515

- LG CU720

- LG Vu CU915

- LG Vu CU920

- LG LX150

- LG Trax CU575

- LG Chocolate VX8500

- LG VX8600

- LG VX8700

- LG VX9400